About the Update
Updated to allow switching between Analog and Digital Mode for the LT / RT buttons.
Please update the firmware by following the instructions below.
Click here to see "How to switch between Analog and Digital Mode" ▶
How to update firmware
1. Click on the link below to download the file.
HPC-062 HORIPAD Turbo SL Firmware Update V107.exe
2. Click to run the downloaded file
3. Press and hold the "BACK" and "START" buttons on the controller. Then, connect the controller to the PC's USB port.
4. When the firmware shows Device Status as ONLINE, click the DOWNLOAD button.
5. Wait for the firmware to download. When completed the progress bar will show 100% and Upgrade SUCCESS
6. Close the firmware and disconnect the controller from the PC, then reconnect the controller to complete the firmware update.
How to switch between Analog and Digital Mode
Digital Mode
The LT and RT buttons will be toggled ON (maximum input value) and OFF (zero input value) like typical buttons.
Analog Mode
Analog Mode allows the LT and RT buttons to be used for gradual analog input.
Note: Depending on the game software, you may need to perform hard button presses, or button presses may be interrupted in game. Please switch to Digital Mode in such cases.
*If you assign the rear buttons (FL or FR) to LT or RT functions, you will not be able to use Analog Mode.